GPC Premium Vertical Sheet Rack, Flatpack

The Owner's Insights on the Premium Vertical Sheet Rack

Bolted and welded rather than one or the other. The sections arrive welded, you bolt them together on site, so you get the rigidity of a welded rack in something that actually fits through a door. The flatpack is 120mm thick, which is the clever part: a fully welded rack of this size would need a loading bay and a clear route in.

Erected it stands 2120mm long by 1240mm wide and 1530mm tall. That is a substantial rack for sheet material stood on end, and the three year guarantee tells you GPC expect it to take the abuse.

Worth knowing before you order: a forklift is needed to unload, and there is assembly involved. Neither is onerous but both want planning.

Why You'll Love this Vertical Sheet Rack

• Bolted and welded construction: welded sections bolted together, so you get welded rigidity in a rack that fits through a doorway.
• 120mm flatpack thickness: arrives as a flat bundle, so getting it into the building is straightforward.
• 2120 x 1240 x 1530mm erected: real capacity for sheet material stored upright.
• 3 year guarantee: GPC back it for three years, which is unusual on racking.
• UK manufactured: made here rather than imported.
• Three section version available: a smaller option in the same range if the full rack is more than you need.

Why You Should Consider GPC Racking

The flatpack-of-welded-sections approach is the right answer for sheet racking. Fully bolted racks work loose under the sideways loads sheet material applies. Fully welded racks will not go through a standard door. This gets both, and GPC guarantee it for three years.

Premium Vertical Sheet Rack Specifications

Vertical sheet rack or horizontal sheet racking?

Vertical stands sheets on end, which takes much less floor area and lets you pull a single sheet from the middle without moving the ones on top. Horizontal racking suits very large or flexible sheets that would bow if stood upright. For most board, ply and metal sheet in standard sizes, vertical is the better use of space.

Full rack or three section?

The GVR01 is the full rack. The GVR20 three section version costs considerably less and suits a smaller range of stock or a tighter space. If you handle three or four sheet types, the smaller one is enough. If you are separating many sizes and materials, buy the full rack.

Delivery and assembly

10 to 15 day lead time. A forklift is needed to unload, and the rack bolts together from welded sections on site. Call 020 3004 1152 if you want to check the erected footprint against your floor space before ordering.

GPC Industries made-to-order: drum stores, Grenadier security cages, hazardous-substance cabinets, sheet and bar racks, smoking and cycle shelters, custom workbenches and bespoke configurations are built per order and typically delivered in 10–20 working days from order acceptance.

Larger units, oversized cages and project work may extend further. Lead time confirmed at order acceptance.

Delivered by UK pallet freight. Note: additional surcharges apply to Scottish Highlands, Islands and remote postcodes. For bulk orders or site-specific configurations, contact us.

Your product is covered by a 12 month Warranty or more if you opted for the extended warranty. Make sure you register your product.