Forklift safety cages let a fork lift truck do two jobs it was never fitted out for as standard: raising a person for occasional access work, and lifting loose goods securely. This collection covers both — GPC Industries man-riding safety cages built in the UK, plus the Grenadier goods lift cage for palletised and loose loads.
Man cages for occasional access work
The Standard Fork Lift Safety Cage (FLC01Z, or FLC11Y in mobile form) and the Heavy Duty Fork Lift Safety Cage (FLC02Z–FLC04Z, each with a mobile option) are working platforms that locate on the forks of a lift truck, enclosing the occupant with full-height sides and a gate. The heavy-duty range runs to three sizes, so you can match the platform to the truck and the task. Mobile versions add castors so the cage can be wheeled to the racking aisle or plant room where it's needed, rather than carried.
One honest note on use: HSE guidance treats non-integrated working platforms on forklifts as suitable for occasional, unplanned work at height only — stocktaking checks, changing a light fitting, clearing a blocked sensor — not as a routine substitute for a proper access platform. If people are going up daily, look at our mobile steps and access platforms instead. We supply the cage; safe use, truck compatibility and your risk assessment remain yours — our guide to the UK rules on lifting people with a forklift covers PM28, LOLER and the capacity rule in detail.
Goods lift cages
The Grenadier Economy Fork Lift Cage (FLC08Z) is for loads, not people: fully welded mild steel, forged lifting eyes, fork guides, a 1,000 kg load capacity and gas struts on the roof. Cages stack up to four high, and the roof and gates accept a padlock (not supplied), so the same unit doubles as secure storage between lifts — closely related to our storage cages range.
Choosing between them
If a person is going up, it must be a man-riding safety cage — never a goods cage. If it's stock, tooling or waste going up to a mezzanine or down from racking, the Grenadier goods cage is the cheaper, stackable answer. Not sure which fits your trucks? Fork pocket dimensions are listed on each product page, or ask us before ordering. For guidance on working at height more generally, see our warehouse steps buying guide.
Fork lift safety cage FAQs
What do forklift safety cages do?
They let a fork lift truck raise a person for occasional access work, or lift loose goods securely. This collection covers both man-riding cages and a goods lift cage.
Which man-riding cages do you list?
The Standard Fork Lift Safety Cage (FLC01Z, or FLC11Y in mobile form) and the Heavy Duty Fork Lift Safety Cage (FLC02Z to FLC04Z, each with a mobile option), built in the UK by GPC Industries.
What do the mobile versions add?
Castors, so the cage can be wheeled to the racking aisle or plant room where it is needed rather than carried.
Can a man cage replace an access platform?
No. HSE guidance treats non-integrated working platforms on forklifts as suitable for occasional, unplanned work at height only. If people go up daily, look at mobile steps and access platforms instead.
Who is responsible for safe use?
We supply the cage. Safe use, truck compatibility and your risk assessment remain yours.
What is the Grenadier Economy Fork Lift Cage?
The FLC08Z is a goods lift cage: fully welded mild steel with forged lifting eyes, fork guides, a 1,000 kg load capacity and gas struts on the roof.
Can a goods cage lift people?
No. If a person is going up, it must be a man-riding safety cage, never a goods cage.
Can the goods cages be stacked or locked?
They stack up to four high, and the roof and gates accept a padlock (not supplied), so the unit doubles as secure storage between lifts.
How do I check the cage fits my truck?
Fork pocket dimensions are listed on each product page, or ask us before ordering.
